P
AGE
2
05725-02-0499 <90-00201>
ORDERING INFORMATION
NOTE:
This section lists the different options available for this product. To order any of the available
options, contact Dantel Inside Sales through our toll-free number,
1-800-432-6835.
OPTION NUMBER
FEATURES
B18-05725-02
64 discrete alarms, 16 control points, terminal port for access, E2A output, 64 KB digital
output, cross-connect block and four 25-foot cables
GENERAL DESCRIPTION
T
he 05725 Remote E2A shelf is a 12-position 460 Alarm and
Control System (ACS) shelf. This shelf collects discrete alarm
data from central office communications equipment. The alarm
data is processed, concentrated, and converted to E2A protocol for
transmission to the host computer at the Alarm Center. For a
functional schematic of this shelf, refer to sheet 2 of 3 of the
B18-05725-XX drawing that accompanies this Application Manual.
The -02 option is equipped with a 46105 Dual VF 64-kilobit Chan-
nel Module. The output of this shelf is a digital signal that can be
transmitted over a 56K or 64K digital service channel.
M
ODULES
This shelf, like many Dantel shelves is made up of separate plug-
in modules that are factory-wired together to accomplish a task.
The modules used in the 05725-02 shelf are described below and
shown in Fig. 1.
Multiple Alarm Transmitters (MATs) - slots 1-2
Each MAT:
♦
Reports the alarm status for up to 32 independent discrete
alarm inputs
♦
Provides LEDs to indicate active alarms.
NOTE
: Slots 3 and 4 are wired for MATs only and not equipped.
Control Point Module (CPM) - slot 5
The CPM provides 16 discrete (independent) relays controllable by
the MAP. Commands can be entered from the Printer Port of the
MAP using a dumb terminal (refer to 46020-38 manual), or by the
Alarm Center. Any of the 16 control points can be turned on or off
to control a particular piece of equipment.
