46062-0299 <90-00016>
P
AGE
41
GPP C
ONTROL
Purpose:
Tells the system which slave GPP address numbers are valid.
Format:
GPP # ON
GPP # OFF
Remarks:
The symbol # can be an individual device, it can be a group of
devices, or it can be the term ALL, meaning all devices. The
possible range of device addresses can be from 1 through 32.
GPP I
DENTIFICATION
Purpose:
Shows the identification number (address) of the GPP that is
currently being used to access the system.
Format:
GPP ID
Input Example:
GPP ID
Output Response:
ID 1
OK
If the message “This is a slave” appears, it means one of the
following:
♦
This Status Monitor is a slave; that is, it is in a listening
mode only.
♦
The Status Monitor does not have a database configuration
to tell it how to operate. Configure the Status Monitor.
♦
The Status Monitor is a master, but it is not communicating
with 46020 Multiple Alarm Processors (MAPs). Investigate
the communications failure.
PRINTER SYNTAX
