46062-0299 <90-00016>
P
AGE
21
♦
If the system is operating properly, a prompt (OK) appears
on the screen. The GPP is ready to accept command inputs.
♦
If the terminal and GPP do not communicate, remove power
from the GPP. Then check the settings at the terminal and
also at the GPP.
Type UNLOCK and press Enter.
This command unlocks the GPP so you can enter most of the
other commands. If there is a password in the GPP, you will
have to type the password in order to unlock the GPP.
NOTE:
See the Password command in the Syntax Commands section
for instructions on setting up a password.
E
NTERING
C
OMMANDS
After each command you type at the terminal, press Enter to
execute the command.
Some standard ASCII terminals (or computers operating as
terminals) have function keys you can program to do frequently
used keystroke sequences in a single keystroke. Refer to your
terminal’s user manual for instructions on how to program the
function keys.
F
REQUENTLY
U
SED
C
OMMANDS
Most Printer Syntax commands are seldom used. Frequently
used commands are listed below:
UNLOCK
ACKNOWLEDGE
SYSTEM
LIST
CALL
PAGE
DEVICE STATUS
EDIT
Several editing features are available. The term Ctrl below
refers to the Control or Ctrl key on your keyboard.
Backspace
Press the Backspace key or hold down the Ctrl key and press the
H key.
PRINTER SYNTAX
