-34
-
■
■
■
■
TOUR
<Main Menu>
<Auto Running>
<Tour>
A “tour” is a sequence of presets. When running a
tour the camera moves from preset to preset and
dwell for specific time for each preset. It is useful if
you need to repeat switching among a number of
presets. E.g. A shopping mall has several entrances.
A tour can automatically loop the position of each
entrance.
NOTE: 8 tours can be set in the system. Each tour
can contain up to 27 presets and the dwell time for
each preset is independant.
<Tour Number.> shows current tour number.
Values are 001~006.
<Dwell>: Set the default dwell time in second for
each preset. Value ranges from 0~99. For example,
DEFAULT DWELL: 001, all presets’ dwell time is
set as 1 second, but user can still set independent
dwell time for each preset in <Edit> menu.
<Edit> Edit presets and corresponding dwell time in
a tour as follows.
Item format is Preset number-Dwell time.
For example 003-02 means go to preset 003 and
dwell for 2 seconds. Move joystick left or right to
select editing item. Move up or down to change
value.
In the above example the tour starts from preset 1
dwells for 1 second, then goes to preset 2 dwell for 5
seconds, then preset 3 for 2 seconds and finally
preset 4 for 1 second.
<Save and Back> Save the tour and exit
<Cancel and Back> Quit without saving
NOTE: When a preset dwell time is set 0, system
will skip that preset. System will consider preset 0 as
the end of a tour.
NOTE: No delete function applied to tour, edit it
again to replace the previous data.
<Test>: To run the current tour once. Use this
function to check the tour.
<Run>: To run the current tour continuously.
System will loop the tour.
<Back>: Back to upper menu.
Preset-Dwell
001-001 002-004 003-002
004-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
000-001 000-001 000-001
Save And Back
Cancel And Back
Tour Number. : 001
Dwell: 001
Edit
Test
Run
Back