-25
-
SYS TE M IN FO
<Main Menu>
<System Info>
SYSTEM INFO includes following settings.
<Site Info>
Dome ID, name, broadcast address.
<Display Setup>
Screen display.
<Boot-up Screen>
Display boot-up information.
<Password>
Change password.
<Set Default>
Restore factory default settings.
<Reboot System>
Reboot dome system.
■
■
■
■
SITE INFO
<Main Menu>
<System Info>
<Site Info>
<Site ID> shows the current dome’s ID. Each dome
has its unique ID. ID ranges from 001 to 254.
NOTE: <Site ID> can be set by menu only when
DIP switch is set to programmable ID.
Move the cursor to <Site ID> and then move the
joystick right to enter dome ID setting, sub-menu as
follow.
Move the cursor to <Input S/N> and then move the
joystick right, input the serial number according to
the <Site S/N>, and then turn the joystick left to exit
setting. Point cursor to <Back>, and turn joystick
right to exit. Finally, turn joystick up or down to
select desired ID number. When finished, move the
joystick left to save the settings.
<Name> is the title of the dome. Assigning a name to
a dome helps user to remember which dome it is.
<Broadcast Add> is used to set broadcast ID
number. The ID functions the same as dome’s site
ID, default setting is 255. The dome responds to
commands sent to either ID. Refer to <Changing
Values> to learn how to set broadcast address)
Select BACK to return to upper menu.
Site Info
Display Setup
Boot-up Screen
Password
Set Default
System Reboot
Back
Site ID: 007
Name: xxxxxx
Broadcast Add: 255
Back
Site S/N :8888899999
Input S/N:0000000000
Back