- 14
-
■
■
■
■
CORNER MOUNT
Check carefully to make sure the wall is firm and does
not peel off. It is required that the wall can withstand 8
times weight of the dome set.
1.
Mark the fastener positions.
Use the corner mount base as the template to mark
the mounting positions on wall.
2.
Install base.
Put Power/RS-485/ Video cables through the hole
of corner mount base and use M8 nuts to fasten
corner base on the mounting surface.
NOTE: Put cables through the wall of aside the
corner base
3.
Install bracket.
Put cables through the cavity of bracket and fasten
bracket on base
4.
Release the connection circuit board.
Unscrew to release the circuit board on
connection board.
5.
Install housing.
Connect cables through the hole on top of the
housing. Align the fast connector to bracket and fix
with 2 M5 screws
NOTE: Apply water-proof tape to the thread in the
case of outdoor dome
M 5 S C R E W
T A P E