1.4.2 The FC 101 Start-up Wizard for Open
Loop Applications
The built in “wizard” menu guides the installer through the
set up of the drive in a clear and structured manner in order
to setup an open loop application. A open loop application is
here an application with a start signal, analog reference
(voltage or current) and optionally also relay signals (but no
feed back signal from the process applied).
FC
+24V
DIG IN
DIG IN
DIG IN
DIG IN
COM DIG IN
A OUT / D OUT
A OUT / D OUT
18
19
27
29
42
55
50
53
54
20
12
01
02
03
04
05
06
R2
R1
+
-
0-10V
Reference
Start
+10V
A IN
A IN
COM
130BB67
4.10
45
The wizard will initially be shown after power up until any
parameter has been changed. The wizard can always be
accessed again through the quick menu. Press [OK] to start
the wizard. If [BACK] is pressed, the FC 101 will return to the
status screen.
The wizard will initially start up after power up until a
parameter has been changed. The wizard can always be
accessed again through the quick menu. Press OK to start
the wizard.If “Cancel” is pressed, the FC 101 will return to the
status screen.
130BB629.10
Press OK to start Wizard
Push Back to skip it
Setup 1
Quick Guide
VLT HVAC Basic Drive FC 101 Quick Guide
12
MG.18.A1.02 - VLT
®
is a registered Danfoss trademark
1
1