1.4 Programming
1.4.1 Programming with the Local Control
Panel (LCP)
For detailed information on programming, please see
Programming Guide, MG.18.BX.YY
NOTE
The frequency converter can also be programmed from a PC
via RS485 com-port by installing the MCT-10 Set-up
Software. This software can either be ordered using code
number 130B1000 or downloaded from the Danfoss Web
site: www.danfoss.com/BusinessAreas/DrivesSolutions/
softwaredownload
1-20 Motor Power
[2] 0.12kW-0.16HP
Setup 1
Menu
Status
Quick
Menu
Main
Menu
OK
Back
On
Warn.
Alarm
Hand
On
Off
Reset
Auto
On
1
2
3
4
5
6
7
8
10
9
130BB627.10
Com
Illustration 1.4 View of the LCP.
1 Parameter number
and name
6
Indicator lights
2 Parameter value
7
Operation keys and LEDs
3 Setup number
8
Navigation keys
4 Motor direction
9
Selected menu
5 Menu key
10 Alpha-numeric display
Use the [MENU] key to select one of the following menus:
Status:
For readouts only.
Quick Menu:
For access to Quick Menus
Main Menu:
For access to all parameters.
Navigation Keys:
[Back]:
For moving to the previous step or layer in the navigation
structure.
Arrows [
▲
] [
▼
]:
For navigating between parameter groups, parameters and
within parameters.
[OK]:
For selecting a parameter and for accepting changes to
parameter settings.
Operation Keys:
A yellow light above the operation keys indicates the active
key.
[Hand on]:
Starts the motor and enables control of the frequency
converter via the LCP.
[Off/Reset]:
Stops the motor (off). If in alarm mode the alarm will be
reset.
[Auto on]:
The frequency converter is controlled either via control
terminals or serial communication.
Arrows [
▲
] and [
▼
] toggles between the choices in each
menu.
The display indicates the status mode with a small arrow
above “Status”.
At power-up
At the first power-up the user is asked to choose preferred
language. Once selected this screen will never be shown
again in the following powerups, but language can still be
changed in
0-01 Language
.
130BB628.10
Select Language
[
0
] English
Setup 1
Quick Guide
VLT HVAC Basic Drive FC 101 Quick Guide
MG.18.A1.02 - VLT
®
is a registered Danfoss trademark
11
1
1