6.12 Par. Group 15 - Drive Information
6.12.1 15-** Drive Information
Parameter group containing compressor drive information
such as
•
operating data
•
hardware configuration
•
software versions
6.12.2 15-0* Operating data
Parameter group containing operating data, e.g. counters.
15-00 Operating hours
Range:
Function:
0 h
*
[0 - 2147483647 h] View how many hours the frequency
converter has run. The value is saved
when the frequency converter is
turned off.
15-01 Running Hours
Range:
Function:
0 h
*
[0 -
2147483647 h]
View how many hours the motor has run.
Reset the counter in
parameter 15-07 Reset Running Hours
Counter
. The value is saved when the
frequency converter is turned off.
15-02 kWh Counter
Range:
Function:
0 kWh
*
[0 -
2147483647
kWh]
Registering the power consumption of
the motor as a mean value over one
hour. Reset the counter in
parameter 15-06 Reset kWh Counter
15-03 Power-ups
Range:
Function:
0
*
[0 - 2147483647 ] View the number of times the frequency
converter has been powered up.
15-04 Over Temps
Range:
Function:
0
*
[0 - 65535 ] View the number of frequency converter
temperature faults which have occurred.
15-05 Over Volts
Range:
Function:
0
*
[0 - 65535 ] View the number of frequency converter
overvoltages which have occurred.
15-06 Reset kWh Counter
Option:
Function:
[0] Do not reset
No reset of the kWh counter is desired.
[1] Reset counter Press [OK] to reset the kWh counter to zero
(see
NOTICE!
The reset is carried out by pressing [OK].
15-07 Reset Running Hours Counter
Option:
Function:
[0] Do not
reset
[1] Reset
counter
Select
[1] Reset
and press [OK] to reset the
Running Hours counter to zero (see
). This parameter
cannot be selected via the serial port, RS-485.
Select
[0] Do not reset
if no reset of the Running
Hours counter is desired.
15-08 Number of Starts
Range:
Function:
[0 - 4294967295] View the total number of starts performed
since power-on. The value is cleared to zero
at power-up.
15-09 Number of Auto Resets
Range:
Function:
[0 - 4294967295] View the total number of auto resets
performed since power-on. The counter is
cleared to zero at power-up.
Parameter Descriptions
Operating Instructions
MG34M422
Danfoss A/S © Rev. 2013-07-03 All rights reserved.
105
6
6
Summary of Contents for VLT CDS 303
Page 2: ......
