6.13 Parameters: 16-** Data Readouts
16-00 Control Word
Range:
Function:
0
*
[0 - 65535 ] View the Control word sent from the
frequency converter via the serial communi-
cation port in hex code.
16-01 Reference [Unit]
Range:
Function:
0 ReferenceFeed-
backUnit
*
[-999999 -
999999
ReferenceFeed-
backUnit]
View the present reference
value applied on impulse or
analog basis in the unit
resulting from the configu-
ration selected in
parameter 1-00 Configu-
ration Mode
(Hz, Nm, or
RPM).
16-02 Reference [%]
Range:
Function:
0 %
*
[-200 -
200 %]
View the total reference. The total reference
is the sum of digital, analog, preset, bus,
and freeze references, plus catch-up and
slow-down.
16-03 Status Word
Range:
Function:
0
*
[0 - 65535 ] View the status word sent from the frequency
converter via the serial communication port in
hex code.
16-05 Main Actual Value [%]
Range:
Function:
0 %
*
[-100 - 100 %] View the two-byte word sent with the
status word to the Bus Master reporting
the Main Actual Value.
16-09 Custom Readout
Range:
Function:
0 CustomRea-
doutUnit
*
[0 - 0 Custom-
ReadoutUnit]
View the value of custom
readout from
parameter 0-30 Unit for User-
defined Readout
to
parameter 0-32 Custom Readout
Max Value
6.13.1 16-1* Motor Status
16-10 Power [kW]
Range:
Function:
0 kW
*
[0 -
10000
kW]
Displays motor power in kW. The value shown
is calculated based on the actual motor
voltage and motor current. The value is
filtered, and therefore approx. 30 ms may pass
from when an input value changes to when
the data readout values change. The
resolution of readout value on fieldbus is in
10 W steps.
16-11 Power [hp]
Range:
Function:
0 hp
*
[0 -
10000 hp]
View the motor power in hp. The value
shown is calculated based on the actual
motor voltage and motor current. The value is
filtered, and therefore approximately 30 ms
may pass from when an input value changes
to when the data readout values change.
16-12 Motor voltage
Range:
Function:
0 V
*
[0 - 6000 V] View the motor voltage, a calculated value
used for controlling the motor.
16-13 Frequency
Range:
Function:
0 Hz
*
[0 - 6500 Hz] View the motor frequency, without
resonance dampening.
16-14 Motor current
Range:
Function:
0 A
*
[0 - 10000
A]
View the motor current measured as a mean
value, I
RMS
. The value is filtered, and thus
approximately 30 ms may pass from when an
input value changes to when the data
readout values change.
16-15 Frequency [%]
Range:
Function:
0 %
*
[-100 -
100 %]
View a two-byte word reporting the actual
motor frequency (without resonance
dampening) as a percentage (scale 0000-4000
Hex) of
parameter 4-19 Max Output Frequency
.
Set
parameter 9-16 PCD Read Configuration
index
1 to send it with the status word instead of the
MAV.
Parameter Descriptions
VLT
®
Compressor Drives CDS 302/CDS 303
106
Danfoss A/S © Rev. 2013-07-03 All rights reserved.
MG34M422
6
6
Summary of Contents for VLT CDS 303
Page 2: ......
