To view memory contents, follow these steps:
Select Recall #0 button [4] and enter the number
of the test to be retrieved.
If you do not know the test number,
enter the last test number and scroll
through the list using Next [+] or
Previous [–] to find the test you want to review.
To print the result, press the quit button
[0], then press button [5]. A copy of the
result will be printed.
Note:
The result will be printed in the format
last selected through the Set function.
1 0
Vickers by Danfoss Target-Pro 2 Analyzer and Sampler Operation Manual V-PP-MC-0002-E
July 2023
Install software Pt. No. Target-Pro 2-W-30 on a suitable PC
running W indows 95
®
/NT 4.0 or better. Follow instructions
from the Target-Pro 2-View User Manual.
Results Download
1.
Connect RS232 cable to analyzer and serial port on PC.
2.
Switch the analyzer on.
3.
Switch PC on.
Launch Target-Pro 2-View software. From
the File menu, select Upload. Data
Transfer Screen will be displayed.
Transfer Data.
4.
Select log function from Analyzer Main/Test
Progress Screen [6].
5.
Press Transfer Log [1].
The analyzer will download all stored resultsfrom
memory to the software. After downloading, the
analyzer’s memory can be deleted. (select this
option from the PC menu.)
6.
When the transfer is complete, switch the analyzer off.
Software Installation
The internal battery can sustain 8 hours of continuous oper-
ation (approximately 100 tests) after charging for 24 hours. If
the battery becomes completely discharged, charge it for at
least 15 minutes before starting a test. The analyzer must
remain connected to the power adapter until the battery has
had time to recharge.
To recharge the battery, connect the lead from the power
adapter to the DC power input socket on the analyzer. Make
sure the battery charging indicator on the analyzer lights up.
Low Battery Level Indicator
When the low battery level indicator flashes on
the LCD display, recharge the battery as
soon as possible.
Important:
Before recharging the battery, always press the
red button to switch off the analyzer.
Conserving Battery Power
To help extend battery run time, use the power adapter
whenever possible. You can also save battery power by
switching the analyzer off between samples, and by
turning off the Auto Print mode. The LCD screen backlight
dims automatically when the external power supply is not
connected.
Battery Charging
Press the log button [6] to retrieve results s t o r e d
in the analyzer’s memory; the Log Screen will be
displayed.
1) Transfer Log
2) Clear Log
3) Clear Last
4) Recall #0
5) Print
Press a Key to Choose or 0 to Exit
Log Screen
Memor y Recall