Danfoss MPE 70, Operating Manual

Page: 5 / 64

Operating guide |MPE 70
5
180R9426 | AQ367027814446en-000801 | IOM MPE 70 | 08.2022
2. Introduction 2.1 General
MPE 70 is manufactured by Danfoss A/S, and
is sold and marketed by a net of authorised
distributors world wide.
This manual contains the necessary instruc-
tions for the installation, operation and
service of the MPE 70.
All personnel who are responsible
for the operation and maintenance of the
MPE 70 unit must read and fully unders-
tand these instructions, especially the
section “Safety” before:
• Transporting of the MPE 70 unit.
• Lifting the unit.
• Installing the MPE 70 unit on a frame.
• Connecting the MPE 70 unit to the fluid
system.
• Connecting the electrical motor and
instrumentation.
• Commissioning the unit.
• Servicing the MPE 70 unit, mechanics
and electrics.
• Decommissioning the MPE 70 unit.
Ensure that these instructions are
always readily available to all personnel
concerned.
2.2 Target group
This manual is intended for use by
personnel with qualified training and
experience in the operation and
maintenance of a Sea Water Reverse
Osmosis (SWRO) or Brackish Water Reverse
Osmosis (BWRO) system.
2.3 Symbols
Indicates something to be noted by
the reader.
Indicates a situation which will or
could result in damage to the MPE 70
and its function.
Indicates a situation which will or
could result in personal injury and/or
damage to the MPE 70.
Electrical hazard. Indicates a
high-voltage warning
Safety glasses required
Hearing protection required
Safety shoes required
Safety helmet required
2.4 Manufacturer and customer service
Danfoss A/S
High Pressure Pumps
DK-6430 Nordborg, Denmark
Telephone: +45 7488 2222
Email: highpressurepumps@danfoss.com
Homepage: hpp.danfoss.com
2.5 Country specific information
2.5.1 United Kingdom
UK importer:
Danfoss Ltd.
22 Wycombe End
HP9 1NB Beaconsfield
United Kingdom