Danfoss MPE 70, Operating Manual

Page: 42 / 64

Instruction | MPE 70 energy recovery device
42
180R9426 | AQ367027814446en-000801 | IOM MPE 70 | 08.2022
2. Main parts
1. MPE 70
2. Motor
3. Bell housing
4. Flexible coupling
5. Bracket
6. Rail
3. Transport and hand-
ling
Personnel involved in lifting and transportation
of the equipment must be trained in proper
handling and safety procedures. Observe the
local regulations regarding lifting. Use suitable,
permitted lifting equipment. Be aware of indi-
viduals located in the operation area while lifting
the component.
The weight of the MPE 70 including electric mo-
tor can be found in the datasheet. Use suitable
lifting devices, e.g. an overhead crane or forklift.
When lifting the unit use the lifting
eyes and jacking beam (not supplied
by Danfoss) Make sure that the load
is balanced before attempting the
lift
Do not use connections/nozzles for
lifting
Do not use one sling
3.1 Use of lifting eye
The M12 lifting eyes supplied with the MPE 70 are
to be used for straight lift only.
For inclined lift use the lifting eyes from the tool
set.