5.4 Workpiece cutting
5.4.1 Prerequisites
ATTENTION!
Risk of damage to machinery!
The knife may be damaged when the machine is operated wit-
hout work piece prestressing.
•
Never cut without using the bending pins.
Exception:
3” work pieces are cut without the aid of bending pins.
• The bending pin and the hose have to be matched to each
other.
Prerequisites for a correct cutting process:
•
The bending pin position and the work piece diameter are
matched to each other:
–
Large hose diameter = large distance
–
Small hose diameter = small distance
•
The work piece must at least have the length of the minimum
distance between the two bending pins.
•
The work piece must fully be borne on the bending pins.