4.3 Commissioning
The machine is commissioned by the customer's fitter.
1.
Place the machine on an even ground at the place of installa-
tion.
WARNING!
Danger from tilting machine!
If not bolted to the floor, the machine may tilt. There is a risk of
being injured.
• Fix the machine on the floor.
2.
Use suitable bolts to fix the machine legs on the floor.
Place the machine in a way so that it is easily accessible for main-
tenance work from all sides.
3.
Check the machine for damage.
4.
Check the electric cables for damage.
5.
Train the operating staff and record training sessions in “Decla-
ration of trained staff”, Section 9.
WARNING!
Risk of injuries!
Machine components might loosen during transport. Such com-
ponents might be flung out during the cutting process. There is a
risk of being injured.
• Perform a cutting process in idle mode and without a work
piece.
• Check the machine for atypical noise.