5.4.7 Continuous cutting of work pieces
1.
Insert the work piece and move it to the desired position.
If necessary, secure the work piece using the hose guide.
2.
Close the protection cover.
3.
Switch on the motor.
4.
Press the foot pedal until the cutting fork has reached the lowest
position and cut the work piece.
5.
Release the foot pedal.
6.
Wait until the cutting fork has moved back.
7.
Remove the cut work piece.
8.
Feed in the remaining work piece and position as desired.
9.
Repeat steps 4
– 8 for all work pieces.
10. Switch off the motor.
WARNING!
Cutting risk
Once the motor has been switched off, the cutting knife will con-
tinue to run for a short time during which there is still a risk of cut-
ting your extremities.
•
Only open the protective cover once the cutting knife has
come to a complete standstill.
11. Open the protection cover.
12. Remove the workpiece.