6.3.1 Replacing a resharpened cutting knife
1.
Replacing the cutting knife (see “Replacing the cutting knife” in
Section 6)
If the outside diameter of the resharpened cutting knife is
≤ 515 mm, the height of the motor must be adapted to the outside
diameter of the cutting knife.
It is recommended not to use cutting knives with a diameter
smaller than
≤ 515 mm.
2.
Open the motor maintenance door (3) and lift it out.
3.
Remove the right-hand hose guide (1) from the machine.
4.
Dismantle the right-hand, upper side cover (2).