5.6 Overload protection
The motor is protected against overload by a motor protection switch.
After a motor overload, if any, let the motor cool down and restart it.
The restart protection prevents an unintentional restart of the ma-
chine. Starting the machine is only possible by activating the main
power switch again.
5.7 Cleaning
WARNING!
Risk for life and health!
There is an acute risk of injuries when working in the danger
zone of the cutting knife.
•
Disconnect the machine from all energy sources and secure
it against switching on unintentionally.
•
Wear cut-proof gloves.
ATTENTION!
Risk of damage to machinery!
If the machine is cleaned with a steam jet or compressed air, dirt
and water may ingress in the machine and cause serious da-
mage.
• Do not use a steam jet to clean the machine.
• Do not use compressed air to clean the machine.
1.
Use a vacuum cleaner or a soft cloth to clean the machine.
2.
Empty the dust collection trays and clean the maintenance com-
partment of the cutting knife.
3.
Clean the extraction line.