The cut counter counts the cut once the lowest position of the cutting
fork has been reached.
Pressing the RESET button resets the display to 0. Move the reset
button to the lowest position in order to prevent it from being pressed
unintentionally.
5.4.6 Individual cutting of work pieces
1.
Insert the work piece and move it to the desired position.
If necessary, secure the work piece using the guide rollers.
2.
Close the protection cover.
3.
Switch on the motor.
4.
Press the foot pedal until the cutting fork has reached the lowest
position and cut the work piece.
5.
Release the foot pedal.
6.
Wait until the cutting fork has moved back.
7.
Switch off the motor.
WARNING!
Cutting risk
Once the motor has been switched off, the cutting knife will con-
tinue to run for a short time during which there is still a risk of cut-
ting your extremities.
•
Only open the protective cover once the cutting knife has
come to a complete standstill.
8.
Open the protection cover.
9.
Remove the workpiece.
