DANA SPICER AXLE 212, Service Manual

Page: 106 / 176

106
ASSEMBLY
Dana Holding Corporation ASM-0025E - 212 Axle Service Manual
ASSEMBLY
FIGURE 11: Fit the spacer (15) onto the pinion (16).
FIGURE 12: Lubricate the coupling surfaces and position
brake support (14).
Check that the o-ring (17) is intact.
FIGURE 13: Apply Loctite 242 to the screws (13) and tighten
using the criss-cross method. Torque wrench setting: 34.2 -
37.8 N·m
16
15
14
13
FIGURE 14: Lubricate the outer part of the seal (12) and insert
it into the brake support (14) using tool T2 (See drawing T2
p. 109).
NOTE:
Carefully check assembly direction.
FIGURE 15: Install parts in the following sequence: flange
(10), o-ring (11) and nut (9).
Spread Loctite 242 on the threaded portion of the pinion (16)
FIGURE 16: Fit tools T1A (See drawing T1 p. 108) (or T1B),
engage the stop rod and tighten the nut (9).
Torque wrench setting: 280 - 310 N·m
T2 7
T2
14
12
9
10
11
(T20B )
T20A
T1A
(T1B)
9