DANA SPICER AXLE 212, Service Manual

Page: 164 / 176

164
DISASSEMBLY
Dana Holding Corporation ASM-0025E - 212 Axle Service Manual
FIGURE 13: Remove upper gear assembly (12) complete with
bearings (14).
FIGURE 14: Using a puller, remove snap ring (15) from cover
(9) and discard it.
NOTE:
Write down direction of installation.
FIGURE 15: Remove inner bearing (14) from gear assembly
(12).
12
14
15
9
12
12
14
14
FIGURE 16: Remove outer bearing (14) and spacer (16).
FIGURE 17: Disjoin from the steering case the steering bar lo-
cated by the side of the intermediate cover (17).
Remove the complete arm.
For details, see CHECKING WEAR AND REPLACING THE
BRAKING DISCS p. 19.
FIGURE 18: Remove the intermediate cover (17) and the
whole differential unit (18).
For details, see DIFFERENTIAL UNIT p. 61.
12
14
14
16
17
18