DANA SPICER AXLE 212, Service Manual

Page: 127 / 176

DISASSEMBLY
127 Dana Holding Corporation ASM-0025E - 212 Axle Service Manual
FIGURE 7: Force tool T1 (See drawing T1 p. 131) in-between
the planetary gears (7) using two pin-drivers.
Make sure that tool T1 (See drawing T1 p. 131) is perfectly
lined up with the pins (9) when locked.
FIGURE 8: Place the differential carrier (12) under a press,
position guide bushing T2 (See drawing T2 p. 131) and insert
press tool T3A (See drawing T3 p. 132). Press T3A (See dra-
wing T3 p. 132) pin to limit position.
FIGURE 9: Remove press tool T3A (See drawing T3 p. 132)
and guide bushing T2 (See drawing T2 p. 131).
NOTE:
In this condition the tool T1 (See drawing T1 p. 131) con-
tains pin (9).
15
17
12
9
CAUTION
T16B
T1 5
T16B
T2
T3B
T3B
12
9
T16A
T1 5
T2
T3A
FIGURE 10: Remove tool T1 (See drawing T1 p. 131) together
with the pin (9) of the planetary gear.
FIGURE 11: Leave the released planetary gear in position and
again lock tool T1 (See drawing T1 p. 131).
Repeat the operations for the extraction of the pin of the 2nd
planetary gear (9).
Repeat the operations for all other pins.
FIGURE 12: Remove tool T1 (See drawing T1 p. 131) and re-
move the last two planetary gears (7), the 2nd differential side
gear (6) and the relative shim washer (5) from the differential
carrier.
15
12
T1 4
T1
7
7
13
14
15
5
6
12