DANA SPICER AXLE 212, Service Manual

Page: 135 / 176

DISASSEMBLY
135 Dana Holding Corporation ASM-0025E - 212 Axle Service Manual
FIGURE 7: Introduce tool T1 (See drawing T1 p. 140) in-
between the planetary gears (12).
FIGURE 8: Using two pin-drivers, engage tool T1 (See dra-
wing T1 p. 140) in between the planetary gears (12).
Carefully check that tool T1 (See drawing T1 p. 140) keeps
in an aligned position with the pins (11) when locked.
FIGURE 9: Place the differential unit (9) under a press, posi-
tion guide bushing T2 (See drawing T2 p. 140) and insert
press tool T3A (See drawing T3 p. 141). Press press tool T3A
(See drawing T3 p. 141) to end of stroke.
T1 4
T1
12
12
9
11
CAUTION
T16A
T1 5
T16A
T3A
T3A
T2
FIGURE 10: Remove press tool T3A (See drawing T3 p. 141)
and bushing T2 (See drawing T2 p. 140).
NOTE:
In this state, the pin (11) is contained within tool T1 (See
drawing T1 p. 140).
FIGURE 11: Remove tool T1 (See drawing T1 p. 140) and pla-
netary pin (11) with it.
FIGURE 12: Leaving the released planetary in its position,
lock again tool T1 (See drawing T1 p. 140).
Repeat pin extraction operation on the second planetary pin
(11).
Repeat the same operations on the remaining pins.
T16A
T1 5
T3A
T2
9
T1 4
T1
12
12