DANA SPICER AXLE 212, Service Manual

Page: 147 / 176

ASSEMBLY
147 Dana Holding Corporation ASM-0025E - 212 Axle Service Manual
ASSEMBLY
FIGURE 15: ONLY IF PREVIOUSLY DISASSEMBLED
Assemble the differential unit (15). (For details, see DIFFEREN-
TIAL UNIT p. 61). Position the key (21) in the differential unit (19).
FIGURE 16: Install spheres (20), sleeve (19) and stop ring (18).
NOTE:
Pay great attention to ring orientation (18).
FIGURE 17: Install bearing (16) onto the differential carrier (17).
NOTE:
Make sure that the bearing is well set in the differential
carrier.
15
21
20
19
18
16
17
FIGURE 18: Fit o-ring (10) and guide ring (11) onto the piston
(6). Lubricate seals and insert the assembly into tool T1 (See
drawing T1 p. 149).
FIGURE 19: Insert tool T1 (See drawing T1 p. 149) in the cen-
tral unit (22) and push the piston (6) into the seat.
Remove tool T1 (See drawing T1 p. 149)
FIGURE 20: Install spring (7) and washer (8) on the piston (6)
and install tool T2 (See drawing T2 p. 149).
T2 9
T1
6
11
10
T2 9
T1
6
22
T3 0
T2
6
7
8