Dalsa Piranha ES Series, User Manual

Page: 89 / 106

Piranha ES-xx User Manual
Teledyne DALSA 03-032-20070-02
89
Appendix A
Error Handling and
Command List
A1 Error Handling
The follow ing table lists w arning and error m essages and p rovid es a d escrip tion and
p ossible cau se. Warning m essages are retu rned w hen the cam era cannot m eet the fu ll
valu e of the requ est; error m essages are retu rned w hen the cam era is u nable to com p lete
the requ est.
Table 21: Warning and Error Messages
Warning Messages
Camera Response Comment
OK> Cam era execu ted com m and
Warning 01: Ou tsid e of sp ecification> Param eter accep ted w as ou tsid e of sp ecified
op erating range (e.g. gain greater than ±10 d B of
factory setting, or SSF below sp ecification ).
Warning 02: Clip p ed to m in> Param eter w as clip p ed to the cu rrent op erating
range. Use GCP or GET to see valu e u sed .
Warning 03: Clip p ed to m ax> Param eter w as clip p ed to the cu rrent op erating
range. Use GCP or GET to see valu e u sed .
Warning 04: Related p aram eters
ad ju sted > Internal op erating cond ition is ad ju sted to
accom m od ate the entered com m and . E.g.
requ esting exp osu re tim e longer than line tim e
au tom atically ad ju sts the line tim e to m eet the
exp osu re tim e requ irem ent.
Warning 07: Coefficient m ay be
inaccu rate A/ D clip p ing has occu rred > In the region of interest (ROI) greater than 6.251%
single or 1% of averaged p ixel valu es w ere zero or
satu rated .
Warning 08: Greater than 1% of
coefficients have been clip p ed Greater than 1% of FPN or PRN U coefficients have
been calcu lated to be greater than the m axim u m
allow able and so w ere clip p ed .
Warning 09: Internal line rate
inconsistent w ith read ou t tim e> Changing this p aram eter (e.g. vertical binning) has
changed read ou t tim e and that is greater than the
internal SYN C