Dalsa Piranha ES Series, User Manual

Page: 100 / 106

Piranha ES-xx User Manual
03-032-20070-02 Teledyne DALSA
100
Mnemonic Syntax Parameters Description
u p d ate gain reference
ugr
Changes 0d B gain to equ al the cu rrent
analog gain valu e set w ith the
sag
com m and .
Refer to section Analog Signal
Processing: Setting Analog Gain and
Offset for d etails.
verify tem p eratu re
vt
Check the internal tem p eratu re of the
cam era
verify voltage
vv
Check the camera’s input voltages and
retu rn OK or fail
w rite FPN coefficients
wfc
i
Write all cu rrent FPN coefficients to
EEROM w here
i
is:
1
= FPN coefficient set one
2
= FPN coefficient set tw o
3
= FPN coefficient set one
4
= FPN coefficient set tw o
Refer to section 3.6.2 Saving and
Restoring PRN U and FPN Coefficients
for d etails.
w rite PRN U coeffs
wpc
i
Write all cu rrent PRN U coefficients to
EEROM w here
i
is:
1
= PRN U coefficient set one
2
= PRN U coefficient set tw o
3
= PRN U coefficient set one
4
= PRN U coefficient set tw o
Refer to section 3.6.2 Saving and
Restoring PRN U and FPN Coefficients
for d etails.
w rite u ser settings
wus
Write all of the u ser settings to EEROM.
Refer to section 3.6.1 Saving and
Restoring Factory and User Settings for
d etails.