Dalsa Piranha ES Series, User Manual

Page: 24 / 106

Piranha ES-xx User Manual
03-032-20070-02 Teledyne DALSA
24
!

One 6-p in H irose connector for p ow er. Refer to section 2.2.2 Pow er Connector for
d etails.
Figure 3: Piranha ES-8x Input and Output Connectors
Camera Link
Camera Link
Diagnostic LED
+12V to +15V and Ground
WARNING: It is extremely important that you apply the appropriate voltages to your camera.
Incorrect voltages will damage the camera. See 2.2.2 Power Connector for more details.
2.2.1 LED Status Indicator
The cam era is equ ip p ed w ith a red / green LED u sed to d isp lay the op erational statu s of
the cam era. The table below su m m arizes the op erating states of the cam era and the
corresp ond ing LED states.
When m ore than one cond ition is active, the LED ind icates the cond ition w ith the highest
p riority. Error and w arning states are accom p anied by corresp ond ing m essages fu rther
d escribing the cu rrent cam era statu s.
Table 5: Diagnostic LED
Priority Color of Status LED Meaning
1 Flashing Red Fatal Error. Cam era tem p eratu re is too high and
cam era therm al shu td ow n has occu rred or a p ow er
failu re has been d etected .
2 Solid Red Warning. Loss of fu nctionality.
3 Flashing Green Cam era initialization or execu ting a long com m and
(e.g., flat field correction com m and s
ccp
or
ccf
)
4 Solid Green Cam era is op erational and fu nctioning correctly .