Dalsa Piranha ES Series, User Manual

Page: 96 / 106

Piranha ES-xx User Manual
03-032-20070-02 Teledyne DALSA
96
Mnemonic Syntax Parameters Description
restore factory settings
rfs
Restore the camera’s factory settings.
FPN and PRN U coefficients reset to 0.
Refer to section 3.6 Saving and
Restoring Settin gs for d etails.
region of interest
roi
x y x y
Sets the p ixel range affected by the
cag
,
cao
,
gl
,
gla
,
ccf
,
cpa
and
ccp
com m and s. The p aram eters are the
p ixel start and end valu es (
x
) and the
colu m n start and end valu es (
y
) in a
range from
1
to
sensor pixel
count
. Refer to section 3.5.1 Setting a
Region of Interest for d etails.
reset p ixel coeffs
rpc
Reset the p ixel coefficients to 0. Refer to
section Enabling and Disabling Pixel
Coefficients on p age 67 for d etails.
restore u ser settings
rus
Restore the cam era's last saved u ser
settings and FPN and PRN U
coefficients. Refer to section 3.6 Saving
and Restoring Settin gs for d etails.
set analog gain
sag
t f
Sets the analog gain in d B.
t
= Tap valu e.
0
for all tap s or
1
-
number of CCD taps
for ind ivid u al
tap selection.
f
= gain valu e sp ecified from
– 10
to
+10
Refer to Analog Signal Processing:
Setting Analog Gain and Offset on p age
54 for d etails.
set analog offset
sao
t i Sets the analog offset.
t = 0
for all tap s or
1
to
number of
CCD taps
for ind ivid u al tap selection.
i
= Offset valu e in a range from
0
to
255
(12-bit LSB). Offset increases w ith
higher valu es.
Refer to Analog Signal Processing:
Setting Analog Gain and Offset for
d etails.
set binning horizontal
sbh
m
Sets the horizontal binning valu e.
Available valu es are
1
,
2
,
4
, or
8
.
Refer to section 3.3.4 Increasing
Sensitivity w ith Binning on p age 37 for
d etails.
set bau d rate
sbr
i
Set the sp eed of cam era serial
com m u nication p ort. Bau d rates:
9600
,
19200
,
57600
, and
115200
. Defau lt:
9600. Refer to section Setting Bau d Rate
on p age 30 for d etails.