Dalsa Piranha ES Series, User Manual

Page: 25 / 106

Piranha ES-xx User Manual
Teledyne DALSA 03-032-20070-02
25
!
2.2.2 Power Connector
Figure 4: Hirose 6-pin Circular Male—Power Connector
Hirose 6-pin Circular Male
5
4
6
2
3
1
Mating Part: HIROSE
HR10A-7P-6S
The cam era requ ires a single voltage inp u t (+12 to +15V). The cam era m eets all
p erform ance sp ecifications u sing stand ard sw itching p ow er su p p lies, althou gh w ell -
regu lated linear su p p lies p rovid e op tim u m p erform ance.
WARNING: When setting up the camera’s power supplies follow these guidelines:

Ap p ly the ap p rop riate voltages

Protect the cam era w ith a
fast-blow fuse
betw een p ow er su p p ly and cam era.

Do not u se the shield on a m u lti-cond u ctor cable for grou nd .

Keep lead s as short as p ossible to red u ce voltage d rop .

Use high-qu ality
linear
su p p lies to m inim ize noise.

Use an isolated typ e p ow er su p p ly to p revent LVDS com m on m od e range violation.
Note: Camera performance specifications are not guaranteed if your power supply does not
meet these requirements.
2.2.3 Camera Link Data Connector
Figure 5: Camera Link MDR26 Connector
M D R 2 6 F e m a le
1
14
13
26
M atin g P art : 3M 334-31 series
C ab le: 3M 14X26-S ZLB -XXX-0LC **
A note concerning the length of the Camera Link cables
The length of the cables over w hich d ata can be transm itted w ithou t loss d ep end s on the
d ata rate and on the qu ality of the cables.
The cam era w as tested u sing a recognized brand of cable w ith a length of 5 m eters. Data
transm ission is not gu aranteed if you are u sing a cable greater than 5 m eters in length .
Table 6: Hirose Pin Description
Pin Description Pin Description
1 Min +12 to Max +15V 4 GN D
2 Min +12 to Max +15V 5 GN D
3 Min +12 to Max +15V 6 GN D