Dalsa PC2-CamLink, User Manual

Page: 47 / 133

PC2-CamLink User's Manual Part I: PC2-CamLink Board
•
43
B5 B5 x B9 x B9 A13 A13
B6 B6 x x x B10 x A14
B7 B7 x x x B11 x A16
Port C
C0 x x B0 x B0 x x
C1 x x B1 x B1 x x
C2 x x B2 x B2 x x
C3 x x B3 x B3 x x
C4 x x B4 x B4 x x
C5 x x B5 x B5 x x
C6 x x B6 x B6 x x
C7 x x B7 x B7 x x
The PC2-CamLink supports area scan and linescan cameras:
•
Maximum image size up to 8K x 8K pixels for area scan.
•
Maximum image size up to 8K x 8K number of lines for linescan. Variable frame length for
linescan (level control or start/stop pulses).
Input LUT
A different LUT is assigned to all three Camera Link™ ports (port A, port B, and port C). The LUT
operates at the resolution of 8-bits in and 8-bits out. Note that it cannot operate on pixel sizes above 8-
bits. The LUT can be used for point transfers as well as thresholding.
Note: ILUT appears before the data port sequencer. In other words, pixels above 8-bits have not yet
been reformatted at that point. Therefore, the ILUT should not be used for cameras that have a pixel
depth above 8-bits. This is true even if 8-bit truncation is activated in the data port sequencer.
. .
. . .
.
0
1
2
3
252
255
254
253
255
255
255
255
0
0
0
0
Camera
Data Port
Sequencer
Input
1
Output
255
LUT
Figure 13: Lookup Table Example