Dalsa PC2-CamLink User Manual Download Page 100

Page: 100 / 133

•

Part II: Sapera LT

PC2-CamLink User's Manual

The various functions are described below:

File Control

Three controls are provided for image file transfers

•

New:

Clears the current image frame buffer.

•

Load:

Retrieves images in BMP, TIF, CRC, JPG, and RAW formats.

•

Save:

Prompts for a file name, file save location, and image format.

Acquisition Options

Note that unsupported functions are grayed out and not selectable. Function support is dependent on
the frame grabber hardware in use.

•

General – Acquisition Settings:

Allows for PC2-CamLink external trigger mode enabling.

•

Area Scan – Camera Control:

Provides trigger, reset, and integrate controls when supported by

the current hardware and driver. Also offers master HS and VS output.

•

Linescan – Camera Control:

This dialog is not applicable to the PC2-CamLink.

•

Composite - Conditioning:

Offers Brightness and Contrast controls.

•

Load CAM/VIC:

Opens the dialog window ‘Acquisition Parameters’

allowing the user to load a

new set of camera files. This is the same window displayed when the Sapera Acquisition Demo is
first started.

Acquisition Control

•

Grab:

Displays live digitized video from your video source. If your source is a camera, focus and

adjust the lens aperture for the best exposure. Use a video generator as a video source to acquire
reference images.

•

Freeze:

Stops live grab mode. The grabbed image can be saved to disk via the

File•Control•Save

control.

•

Snap:

A single video frame is grabbed.

•

Abort:

Exits the current grab process immediately. If any video signal problem prevents the

freeze function from ending the grab, click

Abort

General Options

Note: functions grayed out are not supported by acquisition hardware.

•

Buffer:

Select from supported frame buffer counts, size, and types.

Summary of Contents for PC2-CamLink






































































































































Search results

Summary of Contents for PC2-CamLink

Reviews:

Related manuals for PC2-CamLink

Brands by name

Popular brands

Dalsa PC2-CamLink, User Manual

Search results

Summary of Contents for PC2-CamLink

Reviews:

Related manuals for PC2-CamLink

Brands by name

Popular brands