18
•
Operational Reference
Falcon™ 4
-CLHS Series
•
Device pane
: View and select from any installed Sapera acquisition device if more than one is
installed in the computer. After a device is selected CamExpert will only present parameters
applicable to that device.
•
Parameters pane
: Allows viewing or changing all acquisition parameters supported by the
acquisition device or frame grabber. This avoids confusion by eliminating parameter choices
when they do not apply to the hardware in use.
When using a Teledyne DALSA frame grabber and camera, CamExpert groups all frame grabber
parameters first and then follows with the supported camera features. Together the user
configures the imaging system.
•
Display pane
: Provides a live or single frame acquisition display. Frame buffer parameters are
shown in an information bar above the image window.
•
Control Buttons
: The Display pane includes CamExpert control buttons. These are:
Acquisition control button:
Click once to start the frame grabber live grab mode, click again to stop.
The Falcon4 is always in free running acquisition mode unless configured to
use an external trigger.
Single frame grab:
Click to acquire one frame from the frame grabber device.
Software trigger button:
With the I/O control parameters set to Trigger Enabled / Software Trigger
type, click to send a single software trigger command.
CamExpert display controls:
(these do not modify the frame buffer data)
Stretch (or shrink) image to fit, set image display to original size, or zoom
the image to any size and ratio. Note that under certain combinations of
image resolution, acquisition frame rate, and host computer speed, the
CamExpert screen display may not update completely due to the host CPU
running at near 100%. This does not affect the acquisition.
Histogram / Profile tool:
Select to view a histogram or line/column profile during live acquisition.
•
Output pane
: Displays messages from CamExpert, camera or the interface driver.
•
Link Signals
: Displays the status of various Link.
CamExpert View Parameters Option
While the
Board
section shows all frame grabber parameters, the
Attached Camera
section
shows camera features filtered by a Visibility attribute which selects the targeted user. These vary
from Beginner (features required for basic operation of the device) to Guru (optional features
required only for complex operations).
Choose parameter visibility via the [ << Less More>> ] control below each feature list. You can
also choose the Visibility level from the
View
–
Parameters
–
Visibility
options menu.
Summary of Contents for Falcon 4-CLHS Series
Page 14: ...12 Falcon4 CLHS Specifications Falcon 4 CLHS Series Effective Quantum Efficiency ...
Page 87: ...Falcon 4 CLHS Series Additional Reference Information 85 Cable Assembly G5 AIOC BLUNT2M ...
Page 88: ...86 Additional Reference Information Falcon 4 CLHS Series ...
Page 89: ...Falcon 4 CLHS Series Additional Reference Information 87 Generic Power Supply with no I O ...
