Dalsa Falcon 4-CLHS Series, User Manual

Page: 10 / 93

8 • Falcon4-CLHS Specifications Falcon™ 4 -CLHS Series
Falcon4-CLHS Specifications
The common specifications listed first are followed by model specific tables of functional features
and timing details.
Common Specifications
Camera Controls
Communication Protocol GenCP (GenICam GenCP compliant software), CLHS X Protocol.
Synchronization Modes Free running, Triggered (via CX4 cable or external I/O).
Exposure Control Internal – Programmable via the camera API
External – Timed Trigger or Trigger Width modes supported via I/O.
Exposure Time Maximum 0.5 sec
Exposure Modes Timed: Programmable in increments of 1µs (minimum time (in µs) is model specific)
Trigger Width:
Pulse controlled via external Trigger pulse width.
Input / Output Ports 2 input / 3 Output, Opto-coupled.
Features
Gain In-Sensor gain.
Defective Pixel Replacement Up to 2048 entries.
Counter and Timer
1 Counter and 1 Timer. User programmable, acquisition independent, with event
generation, and can control Output I/O pins.
Test image Internal generator with choice of static patterns.
User settings Select factory default or either of two user saved camera configurations.
CLHS Link Speed 10.3 Gb / sec. per Lane – 4 or 7 Data Lanes.
Back Focal Distance
12 mm (with M42 lens mount)
Optical Interface
Sensor Alignment (Relative to sides of camera)
Flatness
50 µm
 y 200 µm (Parallelism vs. front plate)
x ± 100 µm (Cross-Scan Direction)
y ± 100 µm (In-Scan Direction)
z ± 300 µm (Along optical axis)
 z ± 1.0° (Rotation around optical axis)
Mechanical Interface
Camera (H x W x L)
see Mechanical Specifications
59 mm x 59 mm x 74mm
Mass Small Case: ~ 317g
CX4 Connector Type Camera Link HS
Power connector Camera power via the power pins on the 10-pin I/O connector.
Electrical Interface
Input Voltage +24V nominal (+10 to +30 Volts DC maximum range)
Power Dissipation (typical) <13W @ 24Vdc