Dalsa Falcon 4-CLHS Series User Manual Download Page 2 | Manualshive

Page: 2 / 93

background image

This document does not contain information whose export/transfer/disclosure

is restricted by the Canadian Export Control

regulation

.

Notice

© 2021 Teledyne Digital Imaging, Inc.

Teledyne DALSA believes all information provided in this manual to be accurate and reliable.
Teledyne DALSA assumes no responsibility for its use. We reserve the right to make changes to
this information without notice. We prohibit the reproduction of this manual in whole or in part by
any means without prior permission obtained from Teledyne DALSA.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and
other countries. Windows, Windows 10 are trademarks of Microsoft Corporation.

All other trademarks or intellectual properties mentioned herein belong to their respective owners.

Document Date: August 18, 2021, 2021
Document Number: 03-032-20295-00

About Teledyne DALSA

Teledyne DALSA, a business unit of Teledyne Digital Imaging Inc., is an international high-
performance semiconductor and Electronics Company that designs, develops, manufactures, and
markets digital imaging products and solutions, in addition to providing wafer foundry services.

Teledyne DALSA offers the widest range of machine vision components in the world. From industry-
leading image sensors through powerful and sophisticated cameras, frame grabbers, vision
processors and software easy-to-use vision appliances and custom vision modules.

Contact Teledyne DALSA

Teledyne DALSA’s headquarters are in Waterloo, Ontario, Canada. We have sales offices in the

USA, Europe and Asia, plus a worldwide network of representatives and agents to serve you
efficiently.

Contact information for sales, support inquiries and directions to our offices are found on our web
site:

Sales Offices:

http://www.teledynedalsa.com/corp/contact/offices/

Technical Support:

http://www.teledynedalsa.com/imaging/support/

«
1
2
3
4
...
»

Summary of Contents for Falcon 4-CLHS Series






























































































Reviews:

No comments

Related manuals for Falcon 4-CLHS Series

Power series E1410SW

Brand: GE Pages: 85

Power series E1410SW

Brand: GE Pages: 85

POWER Pro series X5

Brand: GE Pages: 89

Power PRO series G100

Brand: GE Pages: 2

POWER Pro series X5

Brand: GE Pages: 89

Brand: GE Pages: 85

Power PRO series G100

Brand: GE Pages: 2

Brand: GE Pages: 85

Brand: GE Pages: 85

Brand: GE Pages: 85

Brand: GE Pages: 85

Brand: GE Pages: 85

Brand: GE Pages: 2

Brand: GE Pages: 85

Brand: GE Pages: 84

Brand: GE Pages: 84

Brand: GE Pages: 84

Brand: GE Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands