Dalsa Falcon 4-CLHS Series, User Manual

Page: 11 / 93

Falcon™ 4 -CLHS Series Falcon4-CLHS Specifications • 9
Environmental Conditions
Operating Temperature
(
at camera front plate )
All Models: -20°C to +50°C (-4°F to +122°F) Any metallic camera mounting provides
heat-sinking therefor reducing the internal temperature.
Operating Relative Humidity 5% to 90% non-condensing.
Storage -40°C to +80°C (-4°F to +176°F) temperature at 20% to 80% non-condensing
relative humidity.
Conformity GenIcam compliant
CE, FCC, RoHS, KC
EU RoHS2, EU REACH, China RoHS2
IP Rating IEC60529 IP40
(Protected against foreign object of 1 mm diameter, no protection against water.)
Sensor Cosmetic Specifications
After Factory Calibration and/or Corrections are applied (if applicable — dependent on sensor)
Blemish Specifications Maximum Number of
Defects
Blemish Description
Hot/Dead Pixel defects Typical 0.0025%
Max 0.005%
Any pixel that deviates by ±20% from the average of
neighboring pixels at 50% saturation including pixel stuck at 0
and maximum saturated value.
Spot defects none Grouping of more than 8 pixel defects within a sub-area of 3x3
pixels, to a maximum spot size of 7x7 pixels.
Clusters defects none Grouping of more than 5 single pixel defects in a 3x3 kernel.
Column defects none Vertical grouping of more than 10 contiguous pixel defects
along a single column.
Row defects none Horizontal grouping of more than 10 contiguous pixel defects
along a single row.
• Test conditions
• Nominal light = illumination at 50% of saturation
• Temperature of camera is 45°C
• At exposures lower than 0.25 seconds
• At nominal sensor gain (1x)