![background image](http://html1.mh-extra.com/html/dallmeier/dls-4/dls-4_installation-and-configuration-manual_3319249092.webp)
DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
92
Dallmeier electronic
Pause all active alarm-hosts
This contact function allows to activate all configured
alarm hosts. This contact function is no counterpart to the
Pause all active alarm-hosts
contact function. It does
not matter if the alarm host was deactivated by
Pause all
active alarm-hosts
or before.
Pause recording (all recording
modes)
This function allows to stop or pause each active recording
of one or more cameras.
The recording mode of the camera does not play a role
for this function. Recording will be stopped for
Permanent
cameras. If the recording mode of a camera is
Contact
or
Motion detection
, the next event will not trigger the
recording.
Which camera is relevant is defined in the
Contact Pa-
rameter
dialog.
Quit recording pause (all recor
-
ding modes)
This function starts / activates each recording that was
stopped by
Pause recording (all recording modes)
.
The recording mode of the camera does not play a role for
this function. However, attention must be paid to the fact
that a recording may not occur immediately with recording
modes
Contact
or
Motion detection
.
Which camera is relevant is defined in the
Contact
Parameter
dialog.
Start recording camera
(recording mode Contact)
This function starts the recording of one camera that is
defined with recording mode
Contact
.
Which camera is relevant is defined in the
Contact
Parameter
dialog.
Stop recording camera
(recoding mode Contact)
This function stops the recording that is still active (timer
can be expired) that was triggered by
Start recording
Camera (recording mode Contact)
.
Which camera is relevant is defined in the
Contact
Parameter
dialog.
Live display camera
Display of the images of a camera in the 1x1 split. The
images are also displayed if a display sequence is defined
(via
Setup
>
System
>
Display
>
Monitors
>
Sequencer
)
and active.
The duration of the display of that camera depends on
the switching speed, which is set under
Setup
>
System
>
Display
>
Monitors
>
Sequencer
. This means that a
camera is displayed until a switching is triggered manually
or by the sequencer.
Which camera is relevant is defined in the
Contact Para-
meter
dialog. Every activated camera can be selected. It
does not matter if the camera is connected or configured
for recording.
Disable remote access
(LAN, ISDN, modem)
This contact function breaks all active connections of
applications or users that do not have the right
Network
access with contact
. New connection requests are
rejected.
This has no impact on users defined as administrators.
This user group has always all rights.
Enable remote access
(LAN, ISDN, modem)
Lifts the restrictions by the contact function
Disable re-
mote access
(
LAN, ISDN, modem
).