manualshive.com logo in svg

dallmeier DLS 4, Installation And Configuration Manual

Share
Download
dallmeier DLS 4 Installation And Configuration Manual Download Page 98

DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS

98

Dallmeier electronic

Housekeeping info-event

The relay is switched if the system monitoring (house

-

keeping) detects an event of the category "info".
Events of the category "info" are:
- The internal temperature is in the upper/lower/normal 

range.

- The external temperature is in the upper/lower/normal 

range.

- The CPU temperature is in the upper/lower/normal range.

- The average system temperature is in the upper/lower/

normal range.

- The internal/external/CPU temperature average system 

temperature has reached the upper limit. The Recorder 

dialog will be shut down.

- The  revolution  of  the  front  fan  is  too  high/too  low/

 

normal.

- The  revolution  of  the  rear  fan  is  too  high/too  low/

 

normal.

- The  revolution  of  the  HDD  fan  is  too  high/too  low/

 

normal.

The relay is held until the system monitoring defines the 

status as "normal". The time for which the relay is held 

can also be set via the 

Timer

.

Housekeeping error-event

The relay is switched if the system monitoring (house

-

keeping) detects an event of the category "error".
Events of the category "error" are:
- The I/O board could not be put into operation.

- The I/O board is ready for operation.

- The display could not be put into operation.

- The display is ready for operation.

- The CPU temperature cannot be determined.

- The CPU temperature can be determined.

- The internal temperature cannot be determined.

- Error during determination of the internal temperature.

- The internal temperature can be determined.

- The external temperature cannot be determined.

- Error during determination of the external temperature.

- The external temperature can be determined.

- The revolution of the front fan cannot be determined.

- Error during determination of the revolution of the front 

fan.

- The revolution of the front fan can be determined.

- The front fan does not rotate anymore.

- The front fan rotates again.

- The revolution of the rear fan cannot be determined.

- Error during determination of the revolution of the rear 

fan.

- The revolution of the rear fan can be determined.

- The rear fan does not rotate anymore.

- The rear fan rotates again.

- The revolution of the HDD fan cannot be determined.

- Error during determination of the revolution of the HDD 

fan.

- The revolution of the HDD fan can be determined.

- The HDD fan does not rotate anymore.

- The HDD fan rotates again.

Summary of Contents for DLS 4












































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands