DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
90
Dallmeier electronic
NOTE
The function of a camera contact (break or make contact) can
be set in
Setup
>
Interfaces
>
Camera Contacts
.
The configuration of the functions for the so-called
Function n.c.
is displayed when the
show Function n.c.
checkbox is checked.
Fig. 12-3:
show Function n.c.
These functions are set in exactly the same way as the functions for the
Function n.o.
(see below).
12.3
Setting
Every contact input can be assigned 4 functions for the
Function n.o.
and the
Function
n.c.
. These are executed in order when the contact is switched or released.
Ø
Click on one of the
Function 1 - 4
lines for the relevant contact to set a function.
Fig. 12-4: Select a function
Ø
Select the relevant function from the drop-down box.
So-called contact parameters also have to be declared for some functions. This is indicated
by displaying an orange button next to the function name.
Fig. 12-5:
Contact parameters
button
Ø
Click on
Contact parameters
.
The
Contact Parameters
dialog will appear.
Ø
Make the required settings and confirm them by clicking on
OK
.
