DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
57
Dallmeier electronic
Database
In the default configuration it is possible to save certain information with the pictures in the
track (for example indices set using the
Mark
option). When the
Use Database
option is
activated this information additionally will be saved in a database.
The advantage of the database is demonstrated when playing back or searching within a
large track. A search for certain events is generally faster. This relates to the
index search
and
extended search
functions.
The database is mandatory to save position date when the
SmartFinder
is used. The
Use
Database
checkbox for the appropriate camera will be checked automatically in this case
and cannot be unchecked.
Options
Note that a contact input must be configured for the relevant camera (see chapter
Contact
IN
).
Save
This option is available for S tracks only. recording will be stopped when the contact has
been triggered.The S track will be locked. If an empty S track is available, recording will be
continued in it.
Event
The function of this option is the same as
Save
. It will not be executed at once when the
contact is triggered but after the
Contact Recording Duration
has expired.
Mark
A marker (index) will be saved to the track when a camera related contact IN function is
triggered. While playing back theses markings can be searched (
index search
and
exten-
ded search
).
8.4.2.2
Motion
The
Motion
recording mode analyzes every image send by the camera. If a change of a
certain proportion of the picture content is detected between two consecutive images, an
image comparison event (event) has taken place. This picture comparison event triggers
the recording.
Recording will be stopped when the
Post-Event time
is expired and no further motion is
detected.
Ø
Set the
Motion
recording mode.
Ø
Observe the explanations given below.
Fig. 8-21:
Motion
recording mode
