23
MAN# 650814
voltage on each TFT module.
BACK
Exit DISPLAY sub-menu
BACK
Exit INFO sub-menu
SWITCH
DURATION
Select length of Control Knob rotation tone
VOLUME
Select the sound level of the rotation tone
TONE
Select the frequency of the rotation tone
SPD CNT VOL
Select the tone level for monitoring speed counts
BACK
Exit SWITCH sub-menu
UPDATE
AUTO UPD
DSP1, DSP2, etc.
List of displays modules to select for auto update
BACK
Exit AUTO UPD sub-menu
THEME LOAD
STANDARD, PERF, etc.
List of themes to load to ALL display modules
BACK
Exit THEME LOAD sub-menu
START IMAGE
DEFAULT
Use the factory default start image
CUSTOM
Use a loaded custom start image
LOAD
Select a display to load custom start image to from the thumb drive
BACK
Exit START IMAGE sub-menu
MANUAL UPD
Select a display to update software from the thumb drive
BOOT TEST
Run a display boot test
(diagnostic that may be needed for tech assistance)
BACK
Exit UPDATE sub-menu
BACK
Exit SYSTEM sub-menu, return to MAIN MENU
Note: You can exit the SYSTEM sub-menu at any time by switching off the keyed power to the Control Box. Any
setting changes that have been made will be saved.
