[6]
MAN #650832
GRAFIX setup:
**GRAFIX systems can be configured with the Dakota Digital app for Apple and Android devices**
GRAFIX Operations
•
With the vehicle stopped, tap the Control Knob to enter the Main Menu
o
The Main menu can be entered with the vehicle moving, but only the speedometer ADJUST menu will be
available in the SETUP menu
•
Twist the Control Knob clockwise until SETUP is highlighted. Tap the knob to enter the SETUP menu.
•
You may skip to whichever reading you’d like to configure below; they do not need to be done in order.
•
After making a selection, select BACK to save and return to the main menu, then select EXIT to return to normal
operation.
•
Twisting the Control Knob clockwise moves up
↑
the menu list, twisting counterclockwise moves down
↓
the menu
list.
Obtaining RPM from the BIM-01-2-HLLY
•
Twist the Control Knob clockwise until TACH is highlighted. Tap the knob to enter TACH menu.
•
INPUT will be displayed. Tap the Control Knob to enter INPUT menu.
•
CYLINDER will be displayed. Tap the Control Knob to enter CYLINDER menu.
•
Twist the Control Knob counterclockwise until BIM is highlighted. Tap the knob to select BIM.
•
When INPUT is displayed again, twist the Control Knob until BACK is displayed, then tap to return to TACH.
•
When TACH is displayed again, twist the Control Knob until BACK is displayed, then tap to return to SETUP.
•
When SETUP is displayed again, twist the Control Knob until BACK is displayed, then tap to exit.
Obtaining engine temperature from the BIM-01-2-HLLY
•
Twist the Control Knob clockwise until WATER is highlighted. Tap the knob to enter WATER menu.
•
INPUT will be displayed. Tap the Control Knob to enter INPUT menu.
•
Twist the Control Knob counterclockwise until BIM is highlighted. Tap the knob to select BIM.
•
When INPUT is displayed again, twist the Control Knob until BACK is displayed, then tap to return to WATER.
•
When WATER is displayed again, twist the Control Knob until BACK is displayed, then tap to return to SETUP.
•
When SETUP is displayed again, twist the Control Knob until BACK is displayed, then tap to exit.
TIP
: Intake/manifold air temp, air fuel ratio, trans fluid temp, and boost will be displayed if selected in the
LAYOUTS>>GAUGES menu
