[2]
MAN #650832
Table of Contents
Holley EFI Setup
Page 2
Display Setup Overview - VFD3 / VFD3X Setup
Page 3
VHX Setup
Page 4
HDX / RTX Setup
Page 5
GRAFIX Setup
Page 6
BIM Setup Menu
Page 7
Quick Tips and Trouble Shooting
Page 9
Warranty
Page 10
Sniper EFI system setup:
Data that should be available: RPM, Engine temp, Intake/manifold temp, MAP/boost, A/F ratio.
Holley system setup:
No configuration within the Sniper EFI system or software is required.
BIM-01-2-HLLY setup:
The BIM must be configured to understand it will be talking to the Sniper EFI
•
Hold button on BIM-01-2-HLLY and turn ignition on, then release the button.
•
The BIM module should display
(System).
•
Hold button until a dash (
–
) is displayed, and then release.
•
Tap the button to display
(Sniper)
•
Hold button until a dash (
–
) is displayed, and then release.
•
Tap button to display
, then hold to save.
Note:
Speed Input is not a selectable menu option with
selection
– Sniper does not send speed.
