Daikin VRV Aurora RXLQ-TATJU Series, Service Manual

Page: 169 / 442

SiUS341802EC Field Settings for Indoor Unit
Part 5 Field Settings and Test Operation 162
Note(s)
1.4.24 Swing Pattern Settings (For units with the infrared floor sensor only)
Set the flap operation in swing mode.
With the factory swing, flaps facing each other are synchronized to operate, and flaps placed side
by side are set to swing in an opposite direction to agitate airflow to reduce temperature irregularity.
Conventional swing operation (all direction synchronized swing) can be set onsite.

: Factory setting
1.4.25 Airflow Direction Adjustment Range
Make the following airflow direction setting according to the respective purpose.

: Factory setting
When the model FXFQ-AA is attached with a closing member kit, set the Second Code No. to 02 or
03 .
1.4.26 Setting of Static Pressure Selection
Mode
No.
First Code
No.
Second Code
No.
Contents
13 (23) 2
01 All direction synchronized swing
02 —
03

Facing swing

Mode
No.
First Code
No.
Second Code
No.
Contents
13 (23) 4
01 Draft prevention (Upward)
02

Standard

03 Ceiling soiling prevention (Downward)

FXDQ-M

: Factory setting
Mode No. First Code No. Second Code No. Contents
13 (23) 5
01

Standard (FXDQ07-12M: 10 Pa (0.04 inWG),
FXDQ18/24M: 30 Pa (0.12 inWG))

02
High static pressure (FXDQ07-12M: 15 Pa (0.06 inWG),
FXDQ18/24M: 45 Pa (0.18 inWG))

FXMQ-TA

: Factory setting
Mode No. First Code No. Second Code No. Contents
13 (23) 5
01

Standard

02 Level 1
03 Level 2