SiUS281117
Field Setting from Outdoor Unit
82
Field Setting
Mode changing procedure
Mode changing procedure
Setting mode 1
Monitor mode
H1P
Blinking
MODE
MODE
OFF
H1P
Setting mode 2
MODE
ON
H1P
Press and hold the BS1
(MODE) for 5 seconds.
Press the BS1 (MODE) once.
(Normal)
Press the BS1 (MODE)
once.
Using the MODE button, the modes can be changed as follows.
Check item selection (Set)
Contents display
Monitor mode
Press BS3 (RETURN) once.
Press BS3 (RETURN) once.
Setting item selection (Set)
Setting mode 2
(Set): Select mode with BS2 (SET) in each selection step.
Press BS3 (RETURN) once.
Press BS3 (RETURN) once.
Press BS3 (RETURN) once.
Press BS1 (MODE) once.
Press BS1 (MODE) once.
Press BS1 (MODE) once.
Press BS1 (MODE) for more than 5 sec.
Setting mode 1
(Initial condition)
Setting condition
selection (Set)
Setting condition
(Contents) display
