Daikin FTX25JVEA9, Service Manual

Page: 231 / 410

Method of Field Set Si18-201
218 Operating Test
After Setting Stick the Unit No. label at decoration panel air discharge outlet as well as on the back of the
wireless remote controller.
PRECAUTIONS
Set the Unit No. of the receiver and the wireless remote controller to be equal. If the setting
differs, the signal from the remote controller cannot be transmitted.
1. Do not use any settings not listed in the table.
2. For group control with a wireless remote controller, initial settings for all the indoor units of
the group are equal. (For group control, refer to the installation manual attached to the
indoor unit for group control.)
Fan Speed OFF when Thermostat is OFF
When the cool/heat thermostat is OFF, you can stop the indoor unit fan by switching the setting
to “Fan OFF.”
∗
Used as a countermeasure against odor for barber shops and restaurants.
Setting Table
Ultra-Long-Life Filter Sign Setting
When a Ultra-long-life filter is installed, the filter sign timer setting must be changed.
Setting Table
Mode No. First Code No. Second Code No. Setting
11(21) 2 01 —
02 Fan OFF
Mode No. Setting Switch No. Setting Position No. Setting
10 (20) 1 01 Long-Life Filter
02 Ultra-Long-Life Filter (1)
03 Ultra-Long-Life Filter (2)