Daikin DZK Series, Installation Manual

Page: 33 / 56

33
Installation Manual
Rev. 2.00 Date 01-2019
Keep in mind:
to access the main
screen from the Wireless Thermostat
screensaver, press on
Airzone .
Reset Thermostat.
This option resets the thermostat and returns it
to factory values.
ADVANCED CONFIGURATION -WIRELESS THERMOSTAT
To access the advanced configuration menu follow the following
steps:
Linked Zones.
Displays the linked zones and allows you to select
the secondary control dampers associated with the thermostat.
Menu Mode.
The thermostats can be set in Basic or Advanced
mode. They are set in Advanced mode by default. These are the
parameters you can control in Basic mode: On/Off, set-point
temperature and local ventilation.
Offset. This option allows the user to apply an offset to the room
temperature reading. The offset range goes from -5°F to +5˚F (-2.5
to 2.5˚C). The default value is 0˚F. This offset will always be applied
to the measured room temperature of the zone.
Weight.
This option is used to set the weight of each zone for
purposes of determining system operation. The weight of the zone
will be used for calculating the mode (auto-change over) or for
calculating heat demands when using auxiliary heat. It is an
indicator of the size / importance of the zone. Possible values range
from 0-100. By default, the weighting is set to Auto and each zone's
weight is automatically generated based on the number of zones.
For example, if there are four zones, each zone's weight is
automatically set to 25.
Change from Manual to Auto if you want to automatically calculate
the total weight of each zone.
Reset Thermostat.
This option resets the thermostat and returns it
to factory values.
Press once Press and hold Press and hold