Commissioning Manual EM11A021
DCM601A51 intelligent Touch Manager
118
Item
Possible value range
Value at
shipment
Initial value at
new registration
IP address set up
in controller
“1 to 223(*)”.“0 to 255”.“0 to 255”.“0 to
255”
* Addresses starting with “127” cannot
be set up since they are for loopback.
—
192.168.0.1
Web server port number
set up in controller
Default: 80
User Setting: 1024 to 65535, in
increments of 1
—
Default: 80
5.
When finished, touch the OK button to return to the Controller Access Setting screen.
(5)
(6)
(8)
(7)
The registered iTM’s IP address, Web server port number, connection status, and controller
name are listed in
(5)
. You can register up to five iTM.
The
Delete
button
(6)
allows you to delete the iTM selected in the list.
The
Order
button
(7)
allows you to sort the list.
The
Update
button
(8)
allows you to acquire connection statuses and controller names and
refresh the list
(5)
.
•
You must enable the “Web Remote Management” option of each iTM you want to register.
See “5-2 Dealer Option Setup” in this manual.
•
The controller name is the name set up in the network settings on the iTM unit. See “6-1
Network” in this manual.
•
The controller name is automatically acquired if the communication between iTM
integrator and iTM is working normally.
NOTE
Summary of Contents for DCM601A51
Page 125: ...EM11A021 1208 HT...
