Commissioning Manual EM11A021
DCM601A51 intelligent Touch Manager
60
If there is no flaw in the information, touching the OK button on the installation tool screen starts
the installation. When installation is complete, an information dialog appears. Remove the USB
memory and touch the Close button to close the screen. The iTM automatically restarts and
checks the history and version information, and then installation will be completed.
If the data version on the installer side is earlier than that on iTM, the OK button on the
installation tool screen is greyed out and cannot be clicked.
NOTE
4-11 Contact Info
Sets up contact information for inquiries regarding the system.
1. Log into SE Mode from the Menu List screen and display the Service Settings tab (see page 7).
Touch the Contact Info button on the Service Settings tab to display the Contact Information
Setup screen (see page 10).
(1)
2. You can set up to 3 lines of contact information: Lines 1 to 3
(1)
. Touch the Modify button to
display the Text Input dialog. Enter necessary information such as dealer’s name, telephone
number, e-mail address, etc. You can enter up to 50 characters in each line, regardless of single
or double byte.
When finished setting up the contact information, touch the OK button to close the screen.
Summary of Contents for DCM601A51
Page 125: ...EM11A021 1208 HT...