ESS3016X User’s Manual
64
There is valid user: You can select either of them or both of them. The next time when you
load iSCSI share, you need to input account name and password. If you have enabled two
users, you just input either of them to log in.
There is no valid user: you do not need to input account name and password if you have not
selected a valid user here.
In Figure 6-6, you can see the following information.
You are going to create an iSCSi share device, its name is test.
This iSCSI share device total capacity is 60G.
Select host, system map all storage pool in host rack.
This iSCSI share device is created in host and its storage pool name is main_raid17. This
storage pool capacity is 1863.04G and used capacity is 900G.
There is no effective user in iSCSI device.
Figure 6-6
6.2.2 Share Management
6.2.2.1
Share Setup
From share management to share manage, you can see an interface is shown as in Figure 6-7.
Here you can view SAMBA, NFS and FTP share information. Here you can go to SAMBA share
operation, and you can also use this item to add share folder, edit share folder and delete share
folder.
