ESS3016X User’s Manual
39
Figure 3-35
1) Add SAMBA share (In Figure 3-35)
1. Set share folder information.
2. Enbale SAMBA share and then disable NFS and FTP share,
3. Read/write right setup:
Read only: all accessing users can read current folder only.
R/W: All accessing users can read and write current folder.
4. Valid user
If there is no valid user, all log-in users can access current folder.
If there is valid user such as user1, other users can not access current folder.
2) Add NFS share
1. Set share folder information.
2. Enable NFS share and then disable SAMBA and FTP share,
3. Read/write right setup:
Read only: all accessing users can read current folder only.
R/W: All accessing users can read and write current folder.
4. Valid IP
If there is valid IP, only user of IP 10.6.5.77 can access NFS share. The user right is read
/write. See Figure 3-36.
